Details
Aluminum Spacer #AS50-16-.38-Seconds
For 0.3125 or 8mm Screws
OD = 0.5" (1/2") 12.7mm (Standard tolerance: +/-.005", +/-.125mm)
ID = 0.319" 8.1mm (Standard tolerance: +/-.003", +/-.075mm)
L = 0.380" (Just over 3/8") 9.63mm (Standard tolerance: +/-.005", +/-.125mm)
Wall Thickness = 0.09" 2.29mm
Weight = 4.3 lbs/M 1.95 kg/K
Please be aware that these are not made to our usual high quality requirements, therefore we are offering them at a discount until they are gone. They are flawed on one end in that the finish is not as clean as our usual finish. They are not chamfered on the OD as they should be. However, the are perfectly functional. If you normally need a 3/8 Length and can work with a part that is .005 (2 hairs) longer than 3/8" and you want to save some money, then take advantage of these. Our normal return policy still applies to these. If you purchase them and find that they are not suitable for you, then return them for a full refund. You will only be out the shipping cost.
- ROHS Compliant
- Made in the U.S.A.
- We are the manufacturer and seller
- Finish - Plain Aluminum
- Spacers are tumble finished to provide a nice appearance
- Hole is chamfered on both ends -
- To remove burrs
- To make it easier to guide spacer onto bolt/screw/shaft/etc.
- Outer Diameter corners are chamfered lightly -
- Tumble finish makes the OD chamfer into a radius
- Aluminum Alloy is 6061-T6/T651/T6511. This alloy is best for:
- Corrosion resistance
- Welding
- Anodizing or Iriditing
- Please see coatings to add anodizing or iriditing to your order
- 12 colors available
Additional Information
SKU | AS50-16-.380 |
---|---|
Metal Alloy | Aluminum 6061-T6 |
Bolt Hole Size / Inner DIameter | For 5/16" or 8mm Bolts |
Outer Diameter | 1/2 in.---------12.7mm |
Length Decimal/Fraction/Metric | 0.380 in.-------------9.65mm |
Bolt Hole Size | 0.319 |
Outer Diameter | 0.5 |
Length | 0.380 |
Inner Metric | 8.1 |
Outer Metric | 12.7 |
Length Metric | 9.53 |
Price | $0.60 |